HAWE Hydraulik at MINExpo in Las Vegas:

The proportional directional spool valve type PSL with the actuation CAN lite is the ideal and cost-efficient entry into CAN bus communication in many mobile machines.

Electric drive and hydraulis ideally combined.  

The load-holding valve type CLHV is suitable for applications with low and medium tendencies to oscillate and is used especially in connection with proportional directional spool valves, e.g. types PSL and PSV.

HAWE Hydraulik is aware of the importance of functioning explosion protection and provides products that are in accordance with common global standards.

The proportional directional spool valve type PSL is suitable for constant pump systems. The flow rates and load pressures for the individual consumers can be individually adjusted. 

The programming interface eDesign developed by HAWE engineers is ideally suited to facilitate the transition from b/w valve technology to proportional control and is primarily intended for low to medium complexity programming.

The mobile controller type ESX is a freely programmable PLC with an integrated proportional amplifier. The programming languages LogiCAD, C++ and CoDeSys are available for application programming purposes, depending on the type.

Mattro Energy-Packs are more than just exchangeable batteries: They are components of a highly flexible modular system that we can adapt perfectly to vehicles and machines. 

Load-holding valves are a type of pressure control valve. They prevent loads on cylinders or motors dropping in an uncontrolled manner.

In the closed state the check valve type RH has zero leakage. Available with hydraulic release. Hydraulic release suppresses relief surges that can occur at high pressure and with a large consumer volume.

This sturdy, reliable and energy-efficient pump type V30E is particularly suitable for continuous operation in challenging applications like construction and mining equipment.

Variable displacement axial piston pumps operate according to the bent axis principle. They adjust the geometric output volume from maximum to zero. As a result they vary the flow rate that is provided to the loads.

The more efficient the working hydraulics, the longer the operation is possible with the same battery charge. Don't compromise on performance when designing to electrified work machines.

When faced with the ultimate limits set by machine to rock interactions your machinery should operate reliably and safely. A responsive and sturdy hydraulic control increases cutting efficiency, protects the environment and improves operator safety.

The face drilling rigs are designed for tunnelling and mining applications. With their booms these compact drilling jumbos are capable for various drilling applications, e.g. face drilling, cross-cut drilling and blast hole drilling.