Product Finder - HAWE Finland

The range includes compact hydraulic power packs, standard hydraulic power packs and mounted valves.

Hydraulic power packs

The hydraulic pumps from HAWE Hydraulik are characterised by their compact and robust design. They are suitable for low pressure, medium pressure and for applications involving high pressure of up to 1500 bar. The range includes single pumps (radial piston pumps, axial piston pumps, air-driven hydraulic pumps, hand pumps) and pump elements. They can be supplied individually or assembled into a hydraulic power pack in the form of a compact hydraulic power pack or standard version.

Pumps

The range includes directional spool valves, directional seated valves, pressure control valves, flow valves and check valves – either as individual components or combined in valve banks.

Valves

A connection block represents the connecting link between the hydraulic power pack and the hydraulic control. The connection blocks described here are suitable for combining with HAWE compact hydraulic power packs.

Manifolds, valve banks

HAWE Hydraulik system solutions are supplied ready-for-connection as plug & play solutions. Standard sets are available and customer-tailored adjustments can be made upon request. System solutions are employed in the most diverse range of industries and machine types.

System solutions

HAWE Hydraulik offers additional electronic components tailored to our hydraulic components. These include mobile controllers, which actuate complex hydraulic systems. The range includes electronic controls, proportional amplifiers and line connectors.

Electronics

Energy packs, also called rechargeable battery packs, consist of multiple battery modules linked together in a parallel or serial circuit. They act as universally usable electrical energy stores. In a parallel circuit, the energy packs can be expanded to form a battery system in order to reach the machine’s desired range.

Battery packs and Accessories

Hydraulic clamping cylinder generate a pressure-controlled clamping force at the piston. Without pressure the clamping pistons return to their initial position. Axial piston motors are constant motors. They have a constant displacement and therefore generate a fixed rotation speed dependent on the flow rate.

Cylinder, motor

Various fittings are available for hydraulic accessories, which are used to connect these hydraulic devices to the pressure lines of HAWE hydraulic power packs and valves in various assembly situations.

Accessories

Proportional directional spool valves are a type of directional valve. They control the direction of movement and the velocity of individual or multiple hydraulic consumers actuated simultaneously. Control is independent of the load and continuous.

Proportional directional spool valves

On/off directional spool valves are used to control the direction of movement of consumers such as hydraulic motors and hydraulic cylinders.

Directional spool valves

Pressure valves are used to control or limit the system pressure in a plant or to switch in response to a signal pressure.

Pressure control valves

Directional seated valves are a type of directional valve. Their function is to direct the flow of hydraulic medium in certain directions, therefore connecting the relevant connections, or shutting off the flow with zero leakage. By this means they control the movement of the actuators in a hydraulic system.

Directional seated valves

Check valves block volumetric flow in one direction while enabling it in the other direction.

Check valves

Flow valves influence the flow rate in hydraulic systems.

Metering valves

Pre-fill valves are check valves with hydraulic release. They are used, e.g. in top ram presses for suction and emptying the press cylinder on rapid closing and opening.

Suction and pre-fill valves

Check valves with hydraulic release are a type of check valve. They block one or both hydraulic consumer lines or are used as a hydraulically actuated drain valve or idle circulation valve.

Releasable check valves

Line rupture protection valves, also called pipe rupture protection valves are a type of check valve. The valves are normally mounted directly on the cylinder. They prevent uncontrolled cylinder movement in the event of a pipe rupture or hose break. Shuttle valves are a type of check valve. They have two inlets and one outlet. As soon as a pressure signal is present on at least one of the two inlets, an outlet signal is generated. The inlet with the higher pressure is automatically connected to the outlet. The other inlet with lower pressure is blocked by a ball (OR operator).

Line rupture safety valves, Shuttle valves

Check valves with hydraulic release are a type of check valve. They block the oil flow in one direction and open in the opposite direction. In the closed state they have zero leakage.

Check valves

F - Suction and pre-fill valves

NSV - Suction and pre-fill valves